Get started with BeagleBone


I have to admit, the power of IoT did not yet reach my little nerd life here in Berlin. Therefore, I took an effort this year and went to an IoT Hackathon. It was a fun weekend, I think there were just 5 developers and the rest of the crowd came from a social and educational background. Which made it even more fun and interesting.

Anyway, since this weekend I ordered a RaspberryPi and tried to do something useful with it. This idea, and my other habit of simplyfing my life clashed a little bit. So the RaspberryPi sat around for way too long with no real purpose. After browsing the internet though, I found an interesting post from Sayan who set up a BeagleBone board with Go. After React, Go is one of the new technologies I really like. After reading the article, I ordered the BeagleBone Black Wireless and waited impatiently for it to arrive.

Finally there, I did around 4 hours of trial and error to finally figure out how this little board works and what I have to do. Mainly, I wanted:

At the Hackathon back then, I created a temperature and noise dashboard (code is on GitHub). Maybe the BeagleBone could do the same for me at home?

During this simple steps, I bricked the device twice, found some old post in some forum how to rebuild it and now I have working BeagleBone Black Wireless. In addition, I installed my own Go server on it to access it without a USB connection.

Sane HowTo (without the errors)


sudo dd if=BBB-eMMC-flasher-debian-7.5-2014-05-14-2gb.img of=/dev/disk2s1

WGET image

To find out the name of the SD Card, insert it and execute:

df -h

S2 Button BeagleBone

CRITICAL: This step didn’t work for me in a long time. What I did was to find the right image, and during this process plug the BeagleBone onto a power outlet and NOT via the USB cable in the Mac.

VoilĂ , you have a working BeagleBone Black Wireless!